!
!
Cat Mate 255 / 210

Cat Mate Fitting Instruction

Before installing your cat flap please read the fitting instructions supplied with your cat flap carefully.

(A) GLASS DOORS
We recommend that you ask a glazier to cut a hole
of 8 3/4" (223 mm) diameter in the position required,
and then install the cat flap as detailed at 3 and 4
below. Alternatively, you may prefer to replace the
glass panel with a clear plastic panel and install as
detailed below.
NOTE: It is not possible to cut a hole in toughened
glass.
l
(B) WOODEN DOORS, PLASTIC PANELS AND SCREENS
1. Place the Template in desired position on outside
of door and draw round completely.
2. Cut out hole. This may be done by drilling a small
hole and then using art electric jig-saw to cut to
the inside ot the drawn line. Be careful to cut hole
square to door, particularly with thicker doors.
3. Position cat flap frame on outside of panel and
screw interior cover to it using the appropriate
screw/spacer combination for your thickness of
panel (see table below). Do not overtighten
screws. Cover screwheads with the caps
supplied.
4. To train your cat to use the cat flap, prop it open
(eg with a clothes peg) at first and use food as an
encouragement.
i
3 YEAR LIMITED WARRANTY
Pet Mate Ltd guarantee your purchase for a period of three years from the date of original purchase against
any defect arising due to faulty materials or manufacture. Accordingly any defective item will be repaired
free of charge or replaced at the manufacturers option provided that the detect has not been caused by
neglect, misuse or normal wear and tear and proof of purchase date is supplied.